Zhone 6210 ユーザーガイド

6211-A2-ZB21-40

 6211-I1 ADSL2+ Router User’s Guide

25

The Network Properties dialog box displays a list of currently installed 

network components. If the list includes Internet Protocol (TCP/IP), the 

protocol has already been enabled; skip to 

.

4 If Internet Protocol (TCP/IP) does not appear as an installed component, 

click on Add.

5 In the Select Network Component Type dialog box, select Protocol, and 

then click on Add.

6 Select Microsoft in the Manufacturers box.

7 Select Internet Protocol (TCP/IP) in the Network Protocols list, and then 

click on OK.
You may be prompted to install files from your Windows Me installation 

CD or other media. Follow the instructions to install the files.

8 If prompted, click on OK to restart your computer with the new settings.

9 After restarting your PC, double-click on the Network and Dial-up 

Connections icon in the Control Panel.

10 In Network and Dial-up Connections window, right-click on the Network 

icon, and then select Properties.

11 In the Network Properties dialog box, select TCP/IP, and then click on 

Properties. 

12 In the TCP/IP Settings dialog box, click on the radio button labeled Use 

the following IP address. Type an address between 192.168.1.3 and 

192.168.1.254 in the IP Address field and 255.255.255.0 in the Subnet 

Mask field.

13 Click on OK twice to confirm and save your changes, and then close the 

Control Panel.

1 In the Windows task bar, click on the Start button, point to Settings, and 

then click on Control Panel.

2 Double-click on the Network icon.

The Network dialog box displays a list of currently installed network 

components. If the list includes TCP/IP, the protocol has already been 

enabled. Skip to step 9.

3 If TCP/IP does not appear as an installed component, click on Add. The 

Select Network Component Type dialog box appears.

4 Select Protocol, and then click on Add.

The Select Network Protocol dialog box appears.

5 Click on Microsoft in the Manufacturers list box, and then click on TCP/

IP in the Network Protocols list box.

6 Click on OK to return to the Network dialog box, and then click on OK 

again.