Zhone 6212-a2 ユーザーズマニュアル

 

78                                                    May 2004                                      6212-A2-GB20-00 

A Ping test is used to verify the status of a network connection after the RIP or static route 
function is enabled.  Ping sends a request message to the host and waits for a return message.  
This diagnostic function can verify if the remote host is reachable.  Ping can also measure the 
round-trip time to the remote host. 

To access the Ping test screen, click on the Ping tab on the Diagnostics screen. 

Enter the Host Name or IP address of the remote terminal and click Submit to start the test 
and display the results. 

 

 

The following is an example of the ping result. The information is as follows: 

Packets transmitted 

The number of packets that were transmitted 

Packets received 

The number of packets that were received 

Packets lost 

The number of packets lost (transmitted or received) 

Minimum round trip time 

The fastest round-trip time 

Maximum round trip time  The slowest round-trip time