Zhone 6212-a2 ユーザーガイド

2. Hardware Installation and PC Setup

Before you start to access the router using the Ethernet connection, you must 
configure your PC to use DHCP, or change your PC's TCP/IP address to be 
192.168.1.x, where x is any number between 2 and 254, with a subnet mask of 
255.255.255.0. 

Your router's default IP address is 192.168.1.1.

To use the router's DHCP feature, click in the radio button labeled “Obtain an IP 
address automatically” instead of “Use the following IP address” in the following 
procedures.

By default, the LAN port IP address of the router is 192.168.1.1. (You can change 
this address, or another address can be assigned by your ISP.)

To configure the IP address under Windows XP:

1. In the Windows task bar, click on the Start button, and then click on Control 

Panel. 

2. Double-click on the Network Connections icon. 

3. In the LAN or High-Speed Internet window, right-click on the icon 

corresponding to your network interface card (NIC) and select Properties. 
(Often this icon is labeled Local Area Connection). The Local Area Connection 
dialog box is displayed with a list of currently installed network items.