Zhone 6212-a2 ユーザーガイド

3. Using the Web Interface

 

The Apply button will temporarily save these settings. To make the change 
permanent, click on Tools (at the top of the page) and select System Commands. 
At the System Commands page, click on Save All.

To configure LAN parameters, click on Setup on the Home screen. Under LAN 
Setup, click on LAN Configuration. The LAN Configuration screen appears.

By default, your CPE has DHCP server (LAN side) disabled. If you already have a 
DHCP server running on your network, do not enable a second DHCP server. 

To enable DHCP:

1. From the Home screen, click on Setup. 

2. Under LAN Setup, select LAN Configuration. The LAN Group 1 Configuration 

screen appears.