Zhone 6301 インストール手順
6
Getting Started
Before beginning your router’s installation, make sure that you have all the equipment
that you will need.
that you will need.
Package Checklist
In addition to these instructions, verify that your package contains the following:
❑
Hotwire 6351 ReachDSL Router
❑
DSL interface cable with RJ11 modular plugs
❑
Power cord with power transformer
Wiring and Connectors You Will Need
The following wiring and standard connectors are used with this product:
❑
Standard RJ11 (or RJ14) wall jack for the DSL cable.
❑
Multiple line adapter if a telephone and router are connected in the same location.
❑
Standard Ethernet 8-pin, non-keyed modular plug for a PC or workstation with an
Ethernet straight-through or crossover cable.
Ethernet straight-through or crossover cable.
—
Refer to procedures in
page 7 to install cables.
—
on page 17 for standard pin numbers.
Optional Cable and Adapters
The Hotwire 6351 ReachDSL Router is typically configured remotely by the service
provider. The following optional cable and adapters are only used when configuring the
router locally:
provider. The following optional cable and adapters are only used when configuring the
router locally:
❑
Console cable: Straight-through cable with 8-pin non-keyed modular plugs
(Part No. 035-0276-1431)
(Part No. 035-0276-1431)
❑
Console adapter:
—
8-pin modular-to-DB9 adapter plug (Part No. 002-0093-0031), or
—
A configurable DB9-to-RJ45 adapter, wired as shown in