Zhone 5446 インストール手順
TM
1
Hotwire
5446 RTU Customer Premises
Installation Instructions
Document Number 5446-A2-GN10-50
October 1998
Before You Begin
The Hotwire
5446 RTU (Remote Termination Unit) interoperates with the Hotwire
8546 DSL Card in the DSLAM system.
An optional POTS (Plain Old Telephone Service) splitter is available for the Hotwire
5446 RTU. When a POTS splitter is installed, the telephone and 5446 RADSL (Rate
Adaptive Digital Subscriber Line) RTU can function at the same time over the same pair
of copper wires. In order to confirm the RTU installation, the POTS splitter should be
installed first.
5446 RTU. When a POTS splitter is installed, the telephone and 5446 RADSL (Rate
Adaptive Digital Subscriber Line) RTU can function at the same time over the same pair
of copper wires. In order to confirm the RTU installation, the POTS splitter should be
installed first.
To install a POTS splitter, refer to the appropriate POTS splitter document:
Document Number
Document Title
5030-A2-GN10
Hotwire 5030 POTS Splitter Customer Premises
Installation Instructions
Installation Instructions
5038-A2-GN10
Hotwire 5038 Distributed POTS Splitter Customer Premises
Installation Instructions
Installation Instructions
Contact your sales or service representative to order additional product documentation.
Paradyne documents are also available on the World Wide Web at:
Paradyne documents are also available on the World Wide Web at:
http://www.paradyne.com
Select
Service & Support
→
Technical Manuals
Wiring and Cables Needed
The following wiring and standard connectors are used with this product:
New or existing unshielded twisted-pair wiring (CAT3 or better). The CAT3 wiring
must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or 26 AWG (.4 mm).
must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or 26 AWG (.4 mm).
Standard RJ11 wall jack.