Zhone 7995 ユーザーガイド
2. Using the Asynchronous Terminal Interface
2-2
September 2004
7990-A2-GB20-20
Initiating an ATI Session
The Main Menu screen is displayed unless a login ID and password is required or
the ATI is already in use.
the ATI is already in use.
If the ATI is already in use, you will see:
A connection refused or connection failed message (if you are
using a Telnet session), or
using a Telnet session), or
The IP address of the other user (if you are using the Management Serial
port).
port).
If security is enabled on the unit and you used Telnet to access it directly (you did
not log in through the DSLAM management card), the system prompts you for a
login ID and password.
not log in through the DSLAM management card), the system prompts you for a
login ID and password.
Login
Model: 799x
LOGIN
Login ID:
Enter Password:
--------------------------------------------------------------------------------
Ctrl-a to access these functions Exit