Zhone 7995 ユーザーガイド
3. Initial Startup and Configuration
3-16
September 2004
7990-A2-GB20-20
Downloading Firmware
The Download Code screen allows you to download firmware from a TFTP server.
To access the Download Code screen, follow this menu selection sequence:
To access the Download Code screen, follow this menu selection sequence:
Main Menu
→Control →Download Code
Procedure
To download firmware:
1. Position the cursor in the Image File Name field. Type the name of the file to
be downloaded.
The file name may be a regular path name expression of directory names
separated by a forward slash (/) ending with the file name (required when
accessing the MCP FFS). The total path name length can be up to
128 characters.
separated by a forward slash (/) ending with the file name (required when
accessing the MCP FFS). The total path name length can be up to
128 characters.
2. Position the cursor in the TFTP Server IP Address field. Enter the TFTP server
IP address or the MCP IP address for the MCP FFS.
3. Position the cursor in the TFTP Server Destination field. Use the spacebar to
select a network destination for the TFTP server. Select DSL if the TFTP
server destination is the DSL link or COM if the TFTP destination is the COM
port (if COM port is set to NetLink, see
server destination is the DSL link or COM if the TFTP destination is the COM
port (if COM port is set to NetLink, see
4. Position the cursor in the Immediately Apply Download field. If you would like
the download to be effective immediately, select Yes.
main/control/download_code
Model: 799x
DOWNLOAD CODE
Image File Name: Clear
TFTP Server IP Address: 000.000.000.000 Clear
TFTP Server Destination: DSL
Immediately Apply Download: Yes
Start Transfer: No
Packets Sent: 0000000
Packets Received: 0000000
Bytes Sent: 0000000
Bytes Received: 0000000
Transfer Status: Transfer Pending
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit