Zhone 7995 ユーザーガイド
7. Testing
7-8
September 2004
7990-A2-GB20-20
When a Send and Monitor 511 test is active, a count of bit errors is displayed next
to the test duration, and the ResetMon virtual function key is available for use.
Type r or R or select the ResetMon virtual function key to reset the error count.
to the test duration, and the ResetMon virtual function key is available for use.
Type r or R or select the ResetMon virtual function key to reset the error count.
SYNC Data Port Tests (Model 7995)
To access the SYNC Data Port Tests screen, follow this menu selection sequence:
Main Menu
→Test→SYNC Data Port Tests
Use the Command column to start or stop a test. When the Status column shows
that a test is Inactive, Start is displayed; when a test is Active, Stop is displayed.
that a test is Inactive, Start is displayed; when a test is Active, Stop is displayed.
Position the cursor at the desired Start or Stop command and press Enter. The
Results column displays the test duration.
Results column displays the test duration.
main/test/data
Model: 7995
SYNC DATA PORT TESTS
Test Command Status Results
--------------------------------------------------------------------------------
Local Loopbacks
Data Terminal Loopback: Start Inactive 00:00:00
Data Channel Loopback: Start Inactive 00:00:00
Repeater Loopback: Start Inactive 00:00:00
Remote Loopbacks
Send Remote DCLB: Down Send Inactive 00:00:00
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit