Zhone 2004 ユーザーガイド
4-46
2 0 0 0 - A 2 - G B 2 2 - 0 0
Figure 4.43
AAL2 Channel Statistics Menu
Display AAL2 Channel Statistics
Type “D” to display the AAL2 Channel (Audio and Alarm) Statistics. Press
Escape to return to the menu. Press C to reset the statistics, or press any other
key to refresh the statistics and display them again.
Escape to return to the menu. Press C to reset the statistics, or press any other
key to refresh the statistics and display them again.
Clear AAL2 Channel Statistics
Type “C” to reset the AAL2 channel statistics.
MGCP 1.0 (Supported Only in VoIP versions as denoted by an “s” in
the Model Number)
the Model Number)
You may select Voice/NCS by typing “O” on the Main menu (Figure 2.2) to
display the MGCP Management menu (Figure 4.44).
display the MGCP Management menu (Figure 4.44).
NOTICE:
The IAD only displays option “O” to manage VoIP embedded client on
the main menu. The embedded client can be either MGCP or SIP.
the main menu. The embedded client can be either MGCP or SIP.
Figure 4.44
MGCP Management Menu
Each of the options on this menu is described in detail below.
Configure MGCP
Parameters
1
Type “C” on the MGCP Management menu (Figure 4.44) to set the
Transmit and Receive parameters for MGCP. The IAD can support up to
four call agents. These may be specified via IP address or DNS name. The
IAD displays the Notified Entity prompt for the first call agent and asks you
to enter the DNS Name or the IP address.
Transmit and Receive parameters for MGCP. The IAD can support up to
four call agents. These may be specified via IP address or DNS name. The
IAD displays the Notified Entity prompt for the first call agent and asks you
to enter the DNS Name or the IP address.
2
Type the DNS name (mg1.acme.com, for example), or the IP address of the
call agent and press Enter. The IAD updates the IP address of the MGCP
Call Agent (which controls call setup and teardown for all call features
under MGCP) for the entity, increases the entity index by one and prompts
call agent and press Enter. The IAD updates the IP address of the MGCP
Call Agent (which controls call setup and teardown for all call features
under MGCP) for the entity, increases the entity index by one and prompts