Zhone 2004 ユーザーガイド

C o n f i g u r a t i o n

Displays the current Admin State of all ports.

Lets you enable or disable individual ports.

Lets you register a port with a SIP proxy.

Registers all enabled lines with a SIP proxy.

To configure the Default Packet Size, follow the steps below.

Type “P” on the SIP Management menu (Figure 4.46). The IAD prompts 
you to enter the packet size.

Type the packet size value in microseconds and press Enter. The IAD saves 
the new packet size and redisplays the menu.

Press Escape to return to the SIP menu and continue with other voice path 
configuration.

In addition to the above configuration settings, there are some global settings 
that may be required for the proper operation of the SIP client. If you use 
FRDN for the SIP proxy entry above, you must configure the DNS server. 
Refer to Configure DNS Client on page 4-21.

You may also configure a dial plan via external means. The default dial plan 
built into the SIP application is shown below.

“[2-9]11”

“[0-1][2-9]11”

“0[#T]”

“00”

“01[2-9]xx.[#T]”

“*xx”

“011x.[3t]”

“[0-1]xxxxxxx[#T]”

“[0-1][2-9]xxxxxxxxx”

“[2-9]xxxxxxxxx”

“[2-9]xxxxxx[#T]”

“101xxxx.[#T]”

“xxxx[#T]”

You may upload a file by the name of dialplan.st to the IAD to change the 
default dial plan. Each line of that file defines a dial string just like the 
example above. For the syntax of the dial plan, refer to the Dial Plan 
Application Note under Dial Plan on page C-11.