Zhone 2004 ユーザーガイド
C o n f i g u r a t i o n
4-61
displays the current NetBIOS Server address and prompts you to enter a
new NetBIOS Server IP address.
new NetBIOS Server IP address.
4
Type the IP address of the new NetBIOS Server and press Enter. The IAD
displays the current Subnet Mask and prompts you to enter a new one.
displays the current Subnet Mask and prompts you to enter a new one.
5
Type the new subnet mask and press Enter. The IAD displays the current
Domain name and prompts you to enter a new one.
Domain name and prompts you to enter a new one.
6
Type the new domain name and press Enter. The IAD displays the current
Lease Time and prompts you to enter a new DHCP Lease Time.
Lease Time and prompts you to enter a new DHCP Lease Time.
7
Type the new Lease Time value in seconds, and press Enter. The IAD
displays the NetBIOS Type Configuration menu.
displays the NetBIOS Type Configuration menu.
8
Type the option for the NetBIOS node type, and press Enter.
9
Press Escape to return to the DHCP Server Configuration menu and
continue configuring DHCP Server.
continue configuring DHCP Server.
Configure DHCP Address Range Pool
You must configure the DHCP address range pool to set the range of IP
addresses to return to the DHCP clients. All IP addresses must be on the same
subnet.
addresses to return to the DHCP clients. All IP addresses must be on the same
subnet.
To configure the DHCP address range pool, follow the steps below:
1
Type “P” on the DHCP Server Configuration menu to select Configure
DHCP Address Range Pool. The IAD displays the current High IP address
and prompts you to enter a new one.
DHCP Address Range Pool. The IAD displays the current High IP address
and prompts you to enter a new one.
2
Type the new High IP address and press Enter. The IAD displays the current
Low IP address and prompts you to enter a new one.
Low IP address and prompts you to enter a new one.
3
Type the new Low IP address and press Enter. The IAD displays the DHCP
Server Configuration menu.
Server Configuration menu.
Configure DHCP Client Entry
You can configure up to 10 static DHCP client entries by following the steps
below.
below.
1
Type “C” on the DHCP Server Configuration menu to configure DHCP
Client Entry settings. The IAD displays the gateway address and prompts
you to enter the Client entry number to configure.
Client Entry settings. The IAD displays the gateway address and prompts
you to enter the Client entry number to configure.
2
Type the client entry number you’re configuring, and press Enter. The IAD
displays the current Mac address for this entry and prompts you to enter a
new one.
displays the current Mac address for this entry and prompts you to enter a
new one.
3
Type the MAC address in the template provided. The IAD displays the
current Host name and prompts you to enter a new one.
current Host name and prompts you to enter a new one.
4
Type the new host name and press Enter. The IAD displays an update
option. Type “Y” to override the Lease Time default for this entry, “N” to
use the default value, or proceed to Step 5.
option. Type “Y” to override the Lease Time default for this entry, “N” to
use the default value, or proceed to Step 5.