Zhone 2004 ユーザーガイド

ページ / 216
C o n f i g u r a t i o n
4-77
1
Type “X” on the NAT Configuration menu. The IAD prompts for the IP 
address. 
2
Type the IP address to delete and press Enter. The IAD updates the table, 
and displays the NAT Configuration menu.
Delete NAT Local Server Entry
To delete a local server entry, follow the steps below:
1
Type “Y” on the NAT Configuration menu. The IAD prompts for the entry 
number to delete. 
2
Type the number of the table entry and press Enter. The IAD displays the 
following:
Deleting NAT Local Server entry 1, Translated IP address 
115.3.3.1
Translated Port 2, Standard Port 3
The IAD updates the table, and displays the NAT Configuration menu.
Delete NAT Alias Entry
To delete a NAT alias entry, follow the steps below.
1
Type “Z” on the NAT Configuration menu. The IAD prompts for the alias 
entry to delete. 
2
Type the number of the entry and press Enter. The IAD updates the table, 
and displays the NAT Configuration menu.
Setting Derived Timing Options
Use the Derived Timing options to enable and disable Derived Timing, and to 
debug Derived Timing.
Derived Timing Menu
To configure Derived Timing settings, type “T” (Telephony Clock Recovery) 
on the Main menu (Figure 2.2), which will bring up the Derived Timing menu 
(Figure 4.61).
Figure 4.61
Derived Timing Menu 
Each of the options on this menu is described in detail below.