Zhone 2004 ユーザーガイド
5-28
2 0 0 0 - A 2 - G B 2 2 - 0 0
Otherwise, the information shown in the table below is displayed for each
entry.
entry.
Press any key to return to the Reports menu.
System Uptime Report
Type “U” on the Reports menu to display the amount of time elapsed since
the IAD was reset.
the IAD was reset.
Press any key to return to the Reports menu.
Memory Statistics Reports
Type “O” on the Reports menu to display the Memory Statistics menu. The
Memory Statistics menu (1-O) contains two memory display commands:
Memory Statistics menu (1-O) contains two memory display commands:
Figure 5.7
System Memory Statistics Menu
To display a specific memory statistic report, type the option. For details,
refer to the appropriate section below.
refer to the appropriate section below.
Display System Memory Statistics
Type “M” on the Memory Statistics menu to display the System Memory
Statistics report. The System Memory Statistics report displays the following
details about system memory.
Statistics report. The System Memory Statistics report displays the following
details about system memory.
Parameter
Description
Authorization type
None | Password Authentication Protocol (PAP)
Client | PAP Server |Challenge Handshake
Authentication Protocol (CHAP) Client | CHAP
Server
Client | PAP Server |Challenge Handshake
Authentication Protocol (CHAP) Client | CHAP
Server
Slot #/Interface #/Port #
active slot for the PPP interface
Userid/Password/Peer Name
values for the PPP interface