Zhone 2004 ユーザーガイド
A d m i n i s t r a t i o n
3-7
3
Continue with other SNMP settings, or press Escape to return to the Main
menu.
menu.
4
Reset the IAD.
Enable/Disable SNMP via EOC
To Enable or Disable SNMP via EOC, follow the steps below.
1
Type “F” on the SNMP Configuration menu to enable or disable SNMP via
EOC. The IAD displays the current status of SNMP.
EOC. The IAD displays the current status of SNMP.
2
To enable SNMP, type “E” or type “D” to disable. The IAD saves the
configuration (if changed).
configuration (if changed).
3
Continue with other SNMP settings, or press Escape to return to the Main
menu.
menu.
4
Reset the IAD.
Enable SNMP via Both IP and EOC
To Enable SNMP via Both IP and EOC, follow the steps below.
1
Type “A” on the SNMP Configuration menu to enable SNMP via IP and
EOC. The IAD saves the configuration.
EOC. The IAD saves the configuration.
2
Continue with other SNMP settings, or press Escape to return to the Main
menu.
menu.
3
Reset the IAD.
Disable SNMP via Both IP and EOC
To Disable SNMP via both IP and EOC, follow the steps below.
1
Type “B” on the SNMP configuration menu to disable SNMP via IP and
EOC. The IAD saves the configuration.
EOC. The IAD saves the configuration.
2
Continue with other SNMP settings, or press Escape to return to the Main
menu.
menu.
3
Reset the IAD.
Configure System Contact
To configure the System Contact, follow the steps below.
1
Type “P” on the SNMP Configuration menu to configure system contact
(up to 39 alphanumeric characters). The IAD displays the current system
contact and prompts you to enter a new one.
(up to 39 alphanumeric characters). The IAD displays the current system
contact and prompts you to enter a new one.
2
Type the name of the new contact person or department and press Enter.
The IAD save the configuration.
The IAD save the configuration.
3
Continue with other SNMP settings, or press Escape to return to the Main
menu.
menu.
4
Reset the IAD.