Zhone 2004 ユーザーガイド

Type “3”on the ATM Encapsulation Configuration (Figure 4.8) menu to 
select Proprietary Voice encapsulation over a specific PVC. The IAD saves 
the configuration and displays the ATM PVC Configuration menu.

Type “4” on the ATM Encapsulation Configuration (Figure 4.8) menu to 
select RFC 1483 encapsulation with VC Muxing or type “5” to select RFC 
1483 with LLC encapsulation. The IAD displays the ATM Service 
Category Configuration menu (Figure 4.9).

Type “1” to select CBR

− or −
Type “2” to select UBR. The IAD displays the Peak Cell Rate 
Configuration menu (Figure 4.10).

Type the PCR value or press Enter to set the PCR to the maximum rate for 
the current line speed. The IAD saves the configuration and displays the 
ATM PVC Configuration menu (Figure 4.7).

Options 4 and 5 on the ATM Encapsulation Configuration menu (RFC 1483 
using VC Muxing) support routing and bridging.

Type “6” on the ATM Encapsulation Configuration menu (Figure 4.8) to 
select RFC 2364 (PPP0ATM with LLC encapsulation) or type “7” to select 
RFC 2364 (PPP0ATM with VC Muxing).

The IAD displays the current PPP authorization and prompts you to change 
it. If you select options 1 through 4, the IAD displays the current PPP 
authorization user ID and prompts you to enter a new PPP user ID.

Enter the new user ID and press Enter and then type a password and press 
Enter. If you select option 0 (None), the IAD displays the IPCP IP Address 
Type menu.