Zhone 2004 ユーザーガイド
4-44
2 0 0 0 - A 2 - G B 2 2 - 0 0
Each option on this menu is described in detail below.
Display Configuration
Type “D” on the CopperCom Configuration menu to display the current
configuration settings.tiple packets
configuration settings.tiple packets
Compression Format
To set compression globally or by port, follow the steps below.
1
Type “C” on the CopperCom Configuration menu to set the compression
format.
format.
2
Type the port number, or type “0” to set the compression for all ports. The
IAD displays a port prompt.
IAD displays a port prompt.
3
Type the option for the selected compression. The IAD saves the changes
and redisplays the menu.
and redisplays the menu.
4
Press Escape to return to the CopperCom Configuration menu and continue
configuration.
configuration.
Framing Format
1
Type “F” on the CopperCom Configuration menu to display a CopperCom
Configuration menu:
Configuration menu:
Figure 4.39
CopperCom Configuration Menu
2
Type “1” to select a 36 octet packet, using a single packet per frame, or
type “2” to select a 44 octet packet, with multiple packets per frame. The
IAD saves the changes and displays the menu.
type “2” to select a 44 octet packet, with multiple packets per frame. The
IAD saves the changes and displays the menu.
3
Press Escape to return to the CopperCom Configuration menu and continue
configuration.
configuration.
Debug Control
The commands in the CopperCom Debug Control menu are reserved for use
by Paradyne or CopperCom network engineers.
by Paradyne or CopperCom network engineers.
AAL2/LES CCS-ELCP
ATM Adaptation Layer 2/Loop Emulation Services (AAL2/LES) is a
broadband local loop emulation service (specifically telephony) that uses the
ATM AAL2 adaptation layer. CCS-ELCP is defined by ETSI EN 300 432-1
and ETSI EN 300 347-1.
broadband local loop emulation service (specifically telephony) that uses the
ATM AAL2 adaptation layer. CCS-ELCP is defined by ETSI EN 300 432-1
and ETSI EN 300 347-1.