Zhone sia2410r ユーザーガイド
Net To Net Technologies SIA2410R User Manual
Net To Net Technologies 28
Saving the Configuration
The system configuration values are saved in Flash memory, the configuration
values currently being used by the system are lost when the system is
rebooted. To prevent the system configuration values from being lost, non-
volatile memory called Flash memory is employed. If the current system
configuration values are saved in Flash memory, the previous operating
environment can be restored when the system boots up.
values currently being used by the system are lost when the system is
rebooted. To prevent the system configuration values from being lost, non-
volatile memory called Flash memory is employed. If the current system
configuration values are saved in Flash memory, the previous operating
environment can be restored when the system boots up.
Saving Router Configuration Changes
The following command saves the current running configuration to
flash memory.
Command
write config
Displaying the configuration information
You can also display the configuration stored in flash memory by
using the “show config” command. This command prints out the
contents of Flash memory, which will be the snap shot configuration
of the router at the time the user did a “write config”:
using the “show config” command. This command prints out the
contents of Flash memory, which will be the snap shot configuration
of the router at the time the user did a “write config”:
Command
show config
The “show config running” command displays the configuration
information currently running on the router:
Command
show config running