Zhone sia2410r ユーザーガイド
Net To Net Technologies SIA2410R User Manual
Net To Net Technologies 3
Introduction
Introduction to the Net To Net Technologies SIA2410R Router
Overview
The SIA2410R router with SHDSL is a full-featured, stand-alone router with
VLAN and QoS support for connecting diverse Local Area Networks (LANs) to
the Internet and other remote networks. It provides a fast SHDSL (Symmetric
High-speed Digital Subscriber Line) connection to the Internet or between
LANs. The SIA2410R supports a packet-based network technology that
allows high-speed transmission over twisted-pair copper wire between a
DSLAM in the central office and a customer site, or on copper loops between
two sites. The SIA2410R provides a single G.SHDSL port and four Ethernet
switch ports, this allows up to four devices to be connected to the router
without the use of an external hub or switch.
VLAN and QoS support for connecting diverse Local Area Networks (LANs) to
the Internet and other remote networks. It provides a fast SHDSL (Symmetric
High-speed Digital Subscriber Line) connection to the Internet or between
LANs. The SIA2410R supports a packet-based network technology that
allows high-speed transmission over twisted-pair copper wire between a
DSLAM in the central office and a customer site, or on copper loops between
two sites. The SIA2410R provides a single G.SHDSL port and four Ethernet
switch ports, this allows up to four devices to be connected to the router
without the use of an external hub or switch.
Features
The SIA2410R provides the following features.
• Multiple line rates from 72kbps to 2320kbps including rate adaptive mode
when used in point to point configurations
• Interoperates with SµD2000-6/12, SMD2000G-12, SMD2000-24,
SAM2000G-12 and SIM2000-24 Net to Net products
• Integrated 4 port Ethernet switch with MID/MID-X auto sensing ports.
• LED’s on the front side for monitoring and troubleshooting
• IP routing for internet and intranet connectivity
• Various management tools. (RS232 CLI, Telnet CLI and SNMP)
• RIP1, RIP2 IP routing protocol
• Support for Network Address Translation (NAT/PAT)
• DHCP that assigns an IP address to local network nodes automatically
• LED’s on the front side for monitoring and troubleshooting
• IP routing for internet and intranet connectivity
• Various management tools. (RS232 CLI, Telnet CLI and SNMP)
• RIP1, RIP2 IP routing protocol
• Support for Network Address Translation (NAT/PAT)
• DHCP that assigns an IP address to local network nodes automatically
and dynamically
• Configuration flexibility of 802.1Q VLAN support
• Quality of Service (QoS) features including 802.1p Priority, Differentiated
• Quality of Service (QoS) features including 802.1p Priority, Differentiated
Services Code Point (DSCP) – RFC#2474, and LAN Port based Priority.
• Diagnostic utilities such as Ping and Traceroute