Zhone sia2410r ユーザーガイド

 

Net To Net Technologies SIA2410R User Manual 

 

Net To Net Technologies                                                                                                     54 

Command write 

config 

 

2> Reboot the SIA2410R to load new firmware to memory.

Command reboot 

tftp 

When the download process is competed, reset your unit. If 

downloading was not successfully completed or a wrong file was 

downloaded, the system reboot will not complete successfully. In 

such a case, turn the router power switch off and on, and retry 

the downloading. 

 

3> Verify the version of the new firmware using following command : 

Command 

(conf)# show version 
~ 
System Software Release: 

   3.7.13 [Mon Jan 28 10:16:20 2002] running

   

new version

 

   3.7.12 [Mon Dec 17 16:19:42 2001] saved  

 

old version

 

STEP4> Saving new version to Flash memory 
1> Save the downloaded new firmware to Flash memory. When a 

confirmation message appears in the screen, press "y". The file 

not saved in Flash memory will be lost or damaged when the 

system is rebooted. 

Command (conf)# 

write 

tftp 

 
2> Verify new version using following command: 

Command 

(conf)# show version 
~ 

System Software Release: 

   3.7.13  [Mon  Jan  28  10:16:20  2002]  running 

 

new version

 

   3.7.13 [Mon Jan 28 10:16:20 2002] saved   

 

new version

 

Note:   If the connection to TFTP is not successful even after the TFTP 

command was entered, check if the Ethernet communication is live 

between the PC and router or if the TFTP server program is running.