Zenith dpdp40v オーナーマニュアル
42
Troubleshooting check list
No output from one
of the speakers
• Adjust
BALANCE
in the
USER CONTROL
mode of the
SOUND
menu. (Refer to p.36)
Strange sound
from the Monitor
• The reason strange sound comes from the Monitor when turn-
ing the Monitor on or off is due to the signals being input or
output to the Monitor.
This strange noise does not mean that the Monitor is faulty.
output to the Monitor.
This strange noise does not mean that the Monitor is faulty.
No picture &
No sound
• Check whether the Monitor is turned on.
• Check the power cord.
• Plug another product’s power cord into the wall outlet where
the Monitor’s power cord was plugged in.
No or Poor color
or Poor picture
• Select
COLOR
in the
USER CONTROL
mode of the
PIC-
TURE
menu and press the VOLUME (
G
) button.
• Keep a certain distance between the Monitor and the VCR.
• Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the
screen gets dark.)
screen gets dark.)
The remote control
doesn’t work
• Check to see if there is any object between the Plasma
Display and the remote control causing obstruction.
• Check to see if the batteries are installed with the correct
polarities. (Refer to p.24)
• Replace new batteries. (Refer to p.24)
Picture OK &
No sound
• Press the VOLUME (
G
) button.