Zenith h27e44dt 操作ガイド
P A G E 3 4
206-4544 2/1/01
PRG
POWER
CABLE
VCR
AUX
TV
SURF
ENTER
FLASHBK
MUTE
CHANNEL
CHANNEL
VOLUME
VOLUME
1
2
3
4
5
6
7
0
8
9
MENU
REWIND
FFWD
RECORD
QUIT
A
B
C
CC
TV/VCR
SOURCE
PAUSE
TIMER
PLAY
STOP
The device you want to program should be ON.
Refer to the brand programming codes on pages
38 - 39 to find the type and brand name of the
device you're programming. Write down the three-
number code(s).
38 - 39 to find the type and brand name of the
device you're programming. Write down the three-
number code(s).
Press and hold the PRG key. It’s recessed so it
doesn’t get pushed accidentally. When the indica-
tor light turns on, you can release the key.
doesn’t get pushed accidentally. When the indica-
tor light turns on, you can release the key.
Push the key with the name of the device you’re
programming (VCR, CABLE, AUX, TV).
programming (VCR, CABLE, AUX, TV).
Using the NUMBER keypad, enter the three-number
code found on the charts on pages 38 - 39.
code found on the charts on pages 38 - 39.
Press ENTER to save the code The indicator light
will flash three times and turn off if the code was
accepted.
will flash three times and turn off if the code was
accepted.
Point the remote at the device and push the
POWER key. The device should turn off. If not, try
the other codes listed and continue from Step 3.
POWER key. The device should turn off. If not, try
the other codes listed and continue from Step 3.
Programming your Zenith remote will allow you to use one
remote to work up to 7 different devices!
remote to work up to 7 different devices!
Not all devices will work with your Zenith remote control.
1
2
3
4
5
6
7
Indicator Light
6
7
4
5
Programming the Remote
Program your remote to operate a variety of A/ V devices
Mode / Product Compatibility
TV
VCR
CATV
AUX (AUX+1, AUX+2, AUX+3)
TVs VCRs
Cable Boxes,
All products on pp. 38 - 39
Satellite Receivers
3