Zenith h27e44dt 操作ガイド

P A G E   4 3

206-3753

Continued from previous page.
11 STRT CHANNEL (Start Channel)
When active, this function allows you to determine the initial
channel number when the TV is turned ON. This feature is useful
for an in-house information channel, since the TV would always
select that channel when it is turned on. Setting this to 255 caus-
es the last channel viewed when TV was turned off to be the tuned
to channel when the TV is turned on again. 

The range of values is 0 - 255. Use (adjust) keys to choose num-
bers that determine the start channel.

12 STRT VOLUME (Start Volume)
When active, this function allows you to determine the initial vol-
ume level setting when the TV is turned ON. This feature is useful
for an in-house information channel, since the TV would always
select that channel when it is turned on. When inactive, the vol-
ume level and channel retain the settings when the set was last
used.

The range of values is 0 - 63, 255. Use (adjust) keys to choose: 
(1) With number 255, the feature is inactive. (2) Set the volume
level as desired before exiting the installer menu. 

14 CHAN LOCK (Channel Lock)
When set to 1 the CHAN LOCK is on. CHAN LOCK is ideal if a cable
box (or similar) is the sole source for programming—and the TV
must always be on the same channel. Changing channels with
Channel Up/Down or keypad numbers is impossible. Channel Lock
is inactive when set to 0 (default).

Generally, this feature is used in connection with START CHANNEL
(line 11) where the start channel may, for example, be set to 3 or
4. If the start channel is 3 then the TV will remain on channel 3.
NOTE: When channel lock is active AUTO PROGRAM and CH.
ADD/DEL in the SETUP MENU are not active.

15 GHOST CH. (Ghost Channel)
When set to 1, the current channel number is displayed in the
upper right corner of the CRT. The number moves slightly to pre-
vent damage to the screen. The default is “0” or OFF. 
NOTE: When captions are on, the “ghost channel” is not displayed.

17 TEXT MODE
Determines whether TEXT 1, TEXT 2, TEXT 3, or TEXT 4 decoding is
enabled when TEXT is turned on (either from the Setup Menu or
directly with CC on the remote). 
TIP: Set Text Mode to 1 only if text is offered in your video sys-
tem.

18 SLEEP TIMER
When set to 1, the SLEEP TIMER feature may be used (but no mes-
sage is displayed prior to turn-off). When set to 0, the sleep timer
is not available. 

19 CH. OVERRIDE (Channel Override)
When set to 1, the user is allowed to select channels with either
Channel Up/Down or by direct number keypad entry. When set to
0, only those channels that are entered for scanning may be
selected.

Set to 1 for operation with systems from On Command Corporation.

21. CAPTION LOCK
Set to 1 to restore previous caption On/Off state after TV turns off
when set to 0, captions are always off when TV is initially turned
on.

22. FUNCTION PRE
Set to 0 to suppress CHANNEL PREVIEW FUNCTION with some pay
per view systems.

23. FEATURE LEVEL
Default set to ZEN 1 for Zenith IR remote control operation. Set 
O, P LBL for Zenith Private Label IR remote control operation.