Zebra P630i ユーザーガイド

Installation Procedure

980541-003 Rev. A 

P630i, P640i Card Printer User’s Manual 

9

Remove the foam block from the top of the shipping carton.

Lift the printer from the shipping carton.

Remove the protective plastic bag from the printer.

Place the printer in a location that meets the following requirements:

•

A reasonably dust- and dirt-free environment will give better print quality.

•

Flat surface at least 699 mm (27.5 in) x 246 mm (9.7 in) that can support the weight of the 
printer; additional space preferred. Vertical clearance at least 450 mm (17 in). There 
should be easy access to all sides of the printer.

•

Temperature within the range of 10

° to 35°C (50° to 95°F).

•

Relative Humidity 20 to 80%, non-condensing.

•

AC power accessible.

Caution • The printer weighs approximately 15.9 kg (35 lbs).

Save all the packing material and the shipping carton in case the printer needs to 

be moved or shipped. If the original material is lost or damaged, a replacement Shipping Kit 
can be ordered from Zebra.