ZyXEL p-2602r-d1a ユーザーズマニュアル

P-2602R/RL-DxA Series User’s Guide

Chapter 10 Voice

131

Quality of Service (QoS) refers to both a network's ability to deliver data with minimum delay, 
and the networking methods used to provide bandwidth for real-time multimedia applications. 

Network traffic can be classified by setting the ToS (Type Of Service) values at the data 
source (for example, at the ZyXEL Device) so a server can decide the best method of delivery, 
that is the least cost, fastest route and so on.  

DiffServ is a class of service (CoS) model that marks packets so that they receive specific per-
hop treatment at DiffServ-compliant network devices along the route based on the application 
types and traffic flow. Packets are marked with DiffServ Code Points (DSCPs) indicating the 
level of service desired. This allows the intermediary DiffServ-compliant network devices to 
handle the packets differently depending on the code points without the need to negotiate 
paths or remember state information for every flow. In addition, applications do not have to 
request a particular service or give advanced notice of where the traffic is going.

1

DiffServ defines a new DS (Differentiated Services) field to replace the Type of Service 
(TOS) field in the IP header. The DS field contains a 2-bit unused field and a 6-bit DSCP field 
which can define up to 64 service levels. The following figure illustrates the DS field. 

DSCP is backward compatible with the three precedence bits in the ToS octet so that non-
DiffServ compliant, ToS-enabled network device will not conflict with the DSCP mapping.  

Back

Click this to return to the SIP Settings screen without saving your changes.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.

Table 39   VoIP > SIP Settings > Advanced

1.

The ZyXEL Device does not support DiffServ at the time of writing.