ZyXEL GS2200-48 ユーザーガイド

GS2200-48 User’s Guide

This chapter describes the IEEE 802.1x and MAC authentication methods.

Port authentication is a way to validate access to ports on the Switch to clients 
based on an external server (authentication server). The Switch supports the 
following methods for port authentication:

• IEEE 802.1x

2

 - An authentication server validates access to a port based on a 

username and password provided by the user.

• MAC - An authentication server validates access to a port based on the MAC 

address and password of the client.

Both types of authentication use the RADIUS (Remote Authentication Dial In User 
Service, RFC 2138, 2139) protocol to validate users. See 

 for more information on configuring your RADIUS server settings. 

Note: If you enable IEEE 802.1x authentication and MAC authentication on the same 

port, the Switch performs IEEE 802.1x authentication first. If a user fails to 
authenticate via the IEEE 802.1x method, then access to the port is denied.

The following figure illustrates how a client connecting to a IEEE 802.1x 
authentication enabled port goes through a validation process. The Switch 
prompts the client for login information in the form of a user name and password. 
When the client provides the login credentials, the Switch sends an authentication 

2.

 At the time of writing, IEEE 802.1x is not supported by all operating systems. See your operating system 

documentation. If your operating system does not support 802.1x, then you may need to install 802.1x client 
software.