ZyXEL GS2200-48 ユーザーガイド
Chapter 7 Basic Setting
GS2200-48 User’s Guide
65
Temperature
MAC, CPU, and PHY refer to the location of the temperature sensors on
the Switch printed circuit board.
the Switch printed circuit board.
Current
This shows the current temperature at this sensor.
MAX
This field displays the maximum temperature measured at this sensor.
MIN
This field displays the minimum temperature measured at this sensor.
Threshold
This field displays the upper temperature limit at this sensor.
Status
This field displays Normal for temperatures below the threshold and Error
for those above.
for those above.
Fan Speed
(RPM)
(RPM)
A properly functioning fan is an essential component (along with a
sufficiently ventilated, cool operating environment) in order for the device
to stay within the temperature threshold. Each fan has a sensor that is
capable of detecting and reporting if the fan speed falls below the
threshold shown.
sufficiently ventilated, cool operating environment) in order for the device
to stay within the temperature threshold. Each fan has a sensor that is
capable of detecting and reporting if the fan speed falls below the
threshold shown.
Current
This field displays this fan's current speed in Revolutions Per Minute (RPM).
MAX
This field displays this fan's maximum speed measured in RPM.
MIN
This field displays this fan's minimum speed measured in RPM. “<41" is
displayed for speeds too small to measure (under 2000 RPM).
displayed for speeds too small to measure (under 2000 RPM).
Threshold
This field displays the minimum speed at which a normal fan should work.
Status
Normal indicates that this fan is functioning above the minimum speed.
Error indicates that this fan is functioning below the minimum speed.
Error indicates that this fan is functioning below the minimum speed.
Voltage (V)
The power supply for each voltage has a sensor that is capable of
detecting and reporting if the voltage falls out of the tolerance range.
detecting and reporting if the voltage falls out of the tolerance range.
Current
This is the current voltage reading.
MAX
This field displays the maximum voltage measured at this point.
MIN
This field displays the minimum voltage measured at this point.
Threshold
This field displays the percentage tolerance of the voltage with which the
Switch still works.
Switch still works.
Status
Normal indicates that the voltage is within an acceptable operating range
at this point; otherwise Error is displayed.
at this point; otherwise Error is displayed.
This field may also display Absent in the field corresponding to the backup
power supply (BPS_12V), if the backup power supply is not in use.
power supply (BPS_12V), if the backup power supply is not in use.
Table 10 Basic Setting > System Info (continued)
LABEL
DESCRIPTION