ZyXEL P-663H-51 ユーザーガイド
Chapter 2 Introducing the Web Configurator
P-663H-51 User’s Guide
33
"
The management session automatically times out if it is left idle for five
minutes. Simply log back into the ZyXEL Device if this happens.
minutes. Simply log back into the ZyXEL Device if this happens.
2.3 Resetting the ZyXEL Device
If you forget your password or cannot access the web configurator, you will need to use the
RESET button at the back of the ZyXEL Device to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously and the password
will be reset to “1234”.
RESET button at the back of the ZyXEL Device to reload the factory-default configuration
file. This means that you will lose all configurations that you had previously and the password
will be reset to “1234”.
2.3.1 Using the Reset Button
1 Make sure the POWER LED is on (not blinking).
2 Press the RESET button for ten seconds or until the POWER LED begins to blink and
2 Press the RESET button for ten seconds or until the POWER LED begins to blink and
then release it. When the POWER LED begins to blink, the defaults have been restored
and the ZyXEL Device restarts.
and the ZyXEL Device restarts.
2.4 Navigating the Web Configurator
After you log in, use the sub-menus on the navigation panel to go to other screens. Some
fields or links are not available if you entered the user password in the login password screen
(see
fields or links are not available if you entered the user password in the login password screen
(see
).
Figure 8 Web Configurator: First Screen
Use the
submenus
to configure
ZyXEL
Device
features.
submenus
to configure
ZyXEL
Device
features.