ZyXEL P-663H-51 ユーザーガイド

 Chapter 5 WAN Setup

P-663H-51 User’s Guide

When you select IPoA in the second WAN setup add (or edit) screen, this screen displays next. 
Use this screen to configure IPoA connection settings.

Figure 28   Advanced Setup > WAN > Add (3: IPoA)

The following table describes the labels in this screen.  

Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 
recipient) or Broadcast (1 sender - everybody on the network). Multicast delivers IP packets to 
a group of hosts on the network - not everybody and not just 1. 

Table 17   Advanced Setup > WAN > Add (3: IPoA)

WAN IP Address

Enter the IP address from the ISP. Use dotted decimal notation (like 192.168.1.1 
for example). 

WAN Subnet Mask

Enter the subnet mask from the ISP. Use dotted decimal notation (like 
255.255.0.0 for example). 

Use the following 
default gateway

The default is a neighboring router that helps the ZyXEL Device forward traffic to 
its destination. Select this option and enter the gateway’s IP address or select 
the WAN interface to use to connect to it. 

Use the following 
DNS server 
addresses 

The ZyXEL Device uses a DNS server to resolve a domain name (find the 
numeric IP address associated with the domain name). Select this option. Enter 
the DNS server addresses from the ISP in the fields below.  

Back

Click this to return to the previous screen.

Next

Click this to go to the following screen.