ZyXEL 2WG ユーザーガイド
Chapter 39 Network Address Translation (NAT)
ZyWALL 2WG User’s Guide
602
Figure 388 Menu 4: Internet Access & NAT Example
From menu 4 shown above, simply choose the SUA Only option from the Network Address
Translation field. This is the Many-to-One mapping discussed in
Translation field. This is the Many-to-One mapping discussed in
.
The SUA Only read-only option from the Network Address Translation field in menus 4
and 11.3 is specifically pre-configured to handle this case.
and 11.3 is specifically pre-configured to handle this case.
39.4.2 Example 2: Internet Access with a Default
Server
Figure 389 NAT Example 2
In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and
also go to menu 15.2.1 to specify the Default Server behind the NAT as shown in the next
figure.
also go to menu 15.2.1 to specify the Default Server behind the NAT as shown in the next
figure.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel: