ZyXEL p-660h-61 ユーザーガイド
Prestige 660H Series User’s Guide
Remote Management Configuration
15-1
Chapter 15
Remote Management Configuration
This chapter provides information on configuring remote management.
15.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which Prestige
interface (if any) from which computers.
interface (if any) from which computers.
When you configure remote management to allow management from the WAN, you still need to
configure a firewall rule to allow access. See the firewall chapters for details on configuring firewall
rules.
configure a firewall rule to allow access. See the firewall chapters for details on configuring firewall
rules.
You may manage your Prestige from a remote location via:
Internet (WAN only)
ALL (LAN and WAN)
LAN only,
Neither (Disable).
When you Choose WAN only or ALL (LAN & WAN), you still need to configure a firewall rule to
allow access.
allow access.
To disable remote management of a service, select Disable in the corresponding Server Access field.
You may only have one remote management session running at a time. The Prestige automatically
disconnects a remote management session of lower priority when another remote management session
of higher priority starts. The priorities for the different types of remote management sessions are as
follows.
disconnects a remote management session of lower priority when another remote management session
of higher priority starts. The priorities for the different types of remote management sessions are as
follows.
1. Telnet
2. HTTP
15.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
♦
A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or
Web service.
Web service.
♦
You have disabled that service in one of the remote management screens.
♦
The IP address in the Secured Client IP field does not match the client IP address. If it does
not match, the Prestige will disconnect the session immediately.
not match, the Prestige will disconnect the session immediately.
♦
There is already another remote management session with an equal or higher priority running.
You may only have one remote management session running at one time.
You may only have one remote management session running at one time.
♦
There is a firewall rule that blocks it.
15.1.2 Remote Management and NAT
When NAT is enabled:
♦
Use the Prestige’s WAN IP address when configuring from the WAN.