ZyXEL p-660h-61 ユーザーガイド
Prestige 660H Series User’s Guide
23-2
Menu 3 LAN Setup
23.2 Protocol Dependent Ethernet Setup
Depending on the protocols for your applications, you need to configure the respective Ethernet Setup,
as outlined below.
as outlined below.
♦
For TCP/IP Ethernet setup refer to the Internet Access Application chapter.
♦
For bridging Ethernet setup refer to the Bridging Setup chapter.
23.3 TCP/IP Ethernet Setup and DHCP
Use menu 3.2 to configure your Prestige for TCP/IP.
To edit menu 3.2, enter 3 from the main menu to display Menu 3 - LAN Setup. When menu 3
appears, press 2 and press [ENTER] to display Menu 3.2 - TCP/IP and DHCP Ethernet Setup, as
shown next
appears, press 2 and press [ENTER] to display Menu 3.2 - TCP/IP and DHCP Ethernet Setup, as
shown next
:
Figure 23-3 Menu 3.2 TCP/IP and DHCP Ethernet Setup
Follow the instructions in the following table on how to configure the DHCP fields.
Table 23-1 DHCP Ethernet Setup
FIELD DESCRIPTION
EXAMPLE
DHCP Setup
DHCP
If set to Server, your Prestige can assign IP addresses, an IP default
gateway and DNS servers to Windows 95, Windows NT and other
systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the Prestige acts as a surrogate DHCP server and
relays DHCP requests and responses between the remote server and
the clients. Enter the IP address of the actual, remote DHCP server in
the Remote DHCP Server in this case.
gateway and DNS servers to Windows 95, Windows NT and other
systems that support the DHCP client.
If set to None, the DHCP server will be disabled.
If set to Relay, the Prestige acts as a surrogate DHCP server and
relays DHCP requests and responses between the remote server and
the clients. Enter the IP address of the actual, remote DHCP server in
the Remote DHCP Server in this case.
When DHCP is used, the following items need to be set:
Server
(default)
(default)
Client IP Pool Starting
Address
Address
This field specifies the first of the contiguous addresses in the IP
address pool.
address pool.
192.168.1.33
Size of Client IP Pool
This field specifies the size or count of the IP address pool.
32
Menu 3.2 - TCP/IP and DHCP Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= N/A
First address in
the IP pool
the IP pool
Size of the IP
Pool
Pool
IP addresses of
the DNS
servers
the DNS
servers
This is the IP
address of the
Prestige
address of the
Prestige