ZyXEL NSA-2400 ユーザーガイド
NSA-2400 User’s Guide
141
A
P P E N D I X
A
Product Specifications
See also the Getting to Know Your NSA chapter for a general overview of the key features.
Feature Tables
Physical Features
These are the main external physical features.
Firmware Features
These are some of the main firmware features of the NSA.
Table 54 Physical Features
USB Ports
Expand storage capacity by attaching compatible USB (version 2)
hard drives to the USB ports.
hard drives to the USB ports.
Gigabit Ethernet Port
The 10/100/1000 Mbps auto-negotiating Ethernet port allows the
NSA to detect the speed of incoming transmissions and adjust
appropriately without manual intervention. It allows data transfer of
either 100 Mbps or 1000 Mbps in either half-duplex or full-duplex
mode depending on your Ethernet network. Use an 8-wire Ethernet
cable for Gigabit connections. The port is also auto-crossover (MDI/
MDI-X) meaning it automatically adjusts to either a crossover or
straight-through Ethernet cable.
NSA to detect the speed of incoming transmissions and adjust
appropriately without manual intervention. It allows data transfer of
either 100 Mbps or 1000 Mbps in either half-duplex or full-duplex
mode depending on your Ethernet network. Use an 8-wire Ethernet
cable for Gigabit connections. The port is also auto-crossover (MDI/
MDI-X) meaning it automatically adjusts to either a crossover or
straight-through Ethernet cable.
SATA Interface
Serial ATA is a low cost interface technology that allows high speed
data transfer. Serial ATA also allows more efficient internal airflow
and also smaller chassis design.
data transfer. Serial ATA also allows more efficient internal airflow
and also smaller chassis design.
Reset Button
Use the reset button to reset the NSA-2400 (user name to “admin”,
default password to “1234”, default IP address to 192.168.1.3 with
subnet mask of 255.255.255.0) or restore the factory default
configuration file (all configurations, including shares, users,
passwords and so on are returned to the original configurations).
default password to “1234”, default IP address to 192.168.1.3 with
subnet mask of 255.255.255.0) or restore the factory default
configuration file (all configurations, including shares, users,
passwords and so on are returned to the original configurations).
Check that the reset button is enabled in the Maintenance >
Configuration screen.
Configuration screen.
BIOS Reset Button
This button is for service personnel only. It is used to reset the BIOS
settings to the ZyXEL default settings in the event the CMOS battery
inside the NSA expires. This battery should not lose power for many
years unless there's a battery failure or the NSA has been left
powered off for an extended period of time.
settings to the ZyXEL default settings in the event the CMOS battery
inside the NSA expires. This battery should not lose power for many
years unless there's a battery failure or the NSA has been left
powered off for an extended period of time.