ZyXEL 35 ユーザーガイド
ZyWALL 35 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
73
1) Setup VPN rule to allow PC1 to access Dept.1 through the tunnel between GW1 & GW2
2) Setup VPN rule to allow PC2 to access Dept.2 through the tunnel between GW1 & GW2
PC1
PC2
GW2
GW1
Dept.1
Dept.2
192.168.35.101 192.168.35.102
WAN
210.242.82.35
WAN
210.242.82.70
192.168.71.0/24 192.168.72.0/24
The following will illustrate how to configure on the GW1:
1) Login ZyWALL and click at “VPN”
3) Click on the icon to add a new “gateway policy” of the VPN tunnel
4) Enable “NAT Traversal” and configure the WAN IP as the “My Address” of My ZyWALL and
5) Under Authentication Key, “Pre-Shared Key” or “Certificate” can be used as authentication method.
For detailed usage of “Pre-Shared Key” and “Certificate”, please refer to XXX. In this example,
“Pre-Shared Key” is used and the string “12345678” is used as example.