ZyXEL nbg-4615 ユーザーガイド
Chapter 26 Remote Management
NBG4615 User’s Guide
216
26.2.2 System Timeout
There is a default system management idle timeout of five minutes (three
hundred seconds). The NBG4615 automatically logs you out if the management
session remains idle for longer than this timeout period. The management session
does not time out when a statistics screen is polling. You can change the timeout
period in the System screen
hundred seconds). The NBG4615 automatically logs you out if the management
session remains idle for longer than this timeout period. The management session
does not time out when a statistics screen is polling. You can change the timeout
period in the System screen
26.3 WWW Screen
To change your NBG4615’s remote management settings, click Management >
Remote Management > WWW.
Remote Management > WWW.
Figure 122 Management > Remote Management > WWW
The following table describes the labels in this screen.
Table 79 Management > Remote Management > WWW
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
however you must use the same port number in order to use that
service for remote management.
Server Access
Select the interface(s) through which a computer may access the
NBG4615 using this service.
NBG4615 using this service.
Secured Client IP
Address
Address
Select All to allow all computes to access the NBG4615.
Otherwise, check Selected and specify the IP address of the
computer that can access the NBG4615.
computer that can access the NBG4615.
Apply
Click Apply to save your customized settings and exit this screen.
Cancel
Click Cancel to begin configuring this screen afresh.