ZyXEL nbg-4615 ユーザーガイド
Chapter 4 Connection Wizard
NBG4615 User’s Guide
44
The following table describes the labels in this screen.
4.5.2 Wireless Security: WPA-PSK/WPA2-PSK
Choose WPA-PSK or WPA2-PSK security in the Wireless Security screen to set
up a password for your wireless network.
up a password for your wireless network.
Figure 18 Wireless Security: WPA-PSK/WPA2-PSK
Table 9 Wireless Security: No Security
LABEL
DESCRIPTION
Wireless
Network
Name
(SSID)
Network
Name
(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
wireless LAN.
If you change this field on the NBG4615, make sure all wireless stations
use the same SSID in order to access the network.
use the same SSID in order to access the network.
Security
mode
mode
Select a Security level from the drop-down list box.
Choose No Security to have no wireless LAN security configured. If you do
not enable any wireless security on your NBG4615, your network is
accessible to any wireless networking device that is within range.
not enable any wireless security on your NBG4615, your network is
accessible to any wireless networking device that is within range.
Exit
Click this to close the wizard screen without saving.
Back
Click this to return to the previous screen.
Next
Click this to continue.