ZyXEL nbg-4615 ユーザーガイド
Chapter 10 Access Point Mode
NBG4615 User’s Guide
86
10.4.0.1 Navigation Panel
Use the menu in the navigation panel to configure NBG4615 features in Access
Point mode.
Point mode.
The following screen and table show the features you can configure in Access Point
mode.
mode.
Figure 52 Menu: Access Point Mode
for descriptions of the labels shown in the
Navigation panel.
10.5 LAN Screen
Use this section to configure your LAN settings while in Access Point mode.
Click Network > LAN to see the screen below.
Rate
For the LAN ports, this displays the port speed and duplex setting or N/A
when the line is disconnected.
when the line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re
using Ethernet encapsulation. This field displays N/A when the line is
disconnected.
using Ethernet encapsulation. This field displays N/A when the line is
disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN
is enabled and N/A when the WLAN is disabled.
is enabled and N/A when the WLAN is disabled.
Summary
Packet Statistics
Packet Statistics
Click Details... to go to the
Monitor >
Packet Statistics screen
). Use this screen to view port status and packet
specific statistics.
WLAN Station Status
Click Details... to go to the
Monitor >
WLAN Station Status screen
). Use this screen to view the wireless stations
that are currently associated to the NBG4615.
Table 29 Status Screen: Access Point Mode (continued)
LABEL
DESCRIPTION