ZyXEL nbg-334w ユーザーガイド

Chapter 8 LAN

NBG334W User’s Guide

Use this screen to change your basic LAN settings. Click Network > LAN.

Figure 56   Network > LAN > IP 

The following table describes the labels in this screen.

IP alias allows you to partition a physical network into different logical networks over the 
same Ethernet interface. The NBG334W supports three logical LAN interfaces via its single 
physical Ethernet interface with the NBG334W itself as the gateway for each LAN network.
To change your NBG334W’s IP alias settings, click Network > LAN > IP Alias. The screen 
appears as shown.

Table 40   Network > LAN > IP

LAN TCP/IP

IP Address

Type the IP address of your NBG334W in dotted decimal notation 192.168.1.1 

(factory default).

IP Subnet Mask

The subnet mask specifies the network number portion of an IP address. Your 

NBG334W will automatically calculate the subnet mask based on the IP address 

that you assign. Unless you are implementing subnetting, use the subnet mask 

computed by the NBG334W.

Apply

Click Apply to save your changes back to the NBG334W.

Reset

Click Reset to begin configuring this screen afresh.