ZyXEL g-2000 plusv2 ユーザーガイド
ZyXEL G-2000 Plus v2 User’s Guide
244
Chapter 20 General Setup
Note: The IP address updates when you reconfigure menu 1 or perform DHCP client
renewal
Table 86 Menu 1.1 Configure Dynamic DNS
FIELD
DESCRIPTION
Service Provider This is the name of your Dynamic DNS service provider.
Active
Press [SPACE BAR] to select Yes and then press [ENTER] to make dynamic DNS
active.
DDNS Type
Press [SPACE BAR] and then [ENTER] to select DynamicDNS if you have a
dynamic IP address(es). Select StaticDNS if you have a static IP address(s).
Select CustomDNS to have dyns.org provide DNS service for a domain name that
Select CustomDNS to have dyns.org provide DNS service for a domain name that
you already have from a source other than dyndns.org.
Host 1- 3
Enter your host name(s) in the fields provided. You can specify up to two host
names separated by a comma in each field.
User
Enter your user name.
Password
Enter the password assigned to you.
Enable
Wildcards
Your ZyXEL device supports DYNDNS Wildcard. Press [SPACE BAR] and then
[ENTER] to select Yes or No This field is N/A when you choose DDNS client as your
service provider.
Offline
This field is only available when CustomDNS is selected in the DDNS Type field.
Press [SPACE BAR] and then [ENTER] to select Yes. When Yes is selected,
http:/
/www.dyndns.org/
traffic is redirected to a URL that you have previously specified
(see
www.dyndns.org
for details).
Edit Update IP Address:
You can select Yes in either the Use Server Detected IP field (recommended) or the User Specified
You can select Yes in either the Use Server Detected IP field (recommended) or the User Specified
IP Addr field, but not both.
With the Use Server Detected IP and User Specified IP Addr fields both set to No, the DDNS server
With the Use Server Detected IP and User Specified IP Addr fields both set to No, the DDNS server
automatically updates the IP address of the host name(s) with the
ZyXEL device
’s WAN IP address.
DDNS does not work with a private IP address. When both fields are set to No, the
ZyXEL device
must have a public WAN IP address in order for DDNS to work.
Use Server
Detected IP
Press [SPACE BAR] to select Yes and then press [ENTER] to have the DDNS
server automatically update the IP address of the host name(s) with the public IP
address that the ZyXEL device uses or is behind.
You can set this field to Yes whether the IP address is public or private, static or
You can set this field to Yes whether the IP address is public or private, static or
dynamic.
User Specified IP
Address
Press [SPACE BAR] to select Yes and then press [ENTER] to update the IP
address of the host name(s) to the IP address specified below.
Only select Yes if the ZyXEL device uses or is behind a static public IP address.
Only select Yes if the ZyXEL device uses or is behind a static public IP address.
IP Address
Enter the static public IP address if you select Yes in the User Specified IP Addr
field.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.