ZyXEL g-2000 plusv2 ユーザーガイド
ZyXEL G-2000 Plus v2 User’s Guide
Chapter 32 System Information and Diagnosis
327
Figure 185 Menu 24.3 System Maintenance : Log and Trace
32.3.2 UNIX Syslog
The ZyXEL device uses the UNIX syslog facility to log the CDR (Call Detail Record) and
system messages to a syslog server. Syslog can be configured in Menu 24.3.2 – System
Maintenance – UNIX Syslog, as shown next.
system messages to a syslog server. Syslog can be configured in Menu 24.3.2 – System
Maintenance – UNIX Syslog, as shown next.
Figure 186 Menu 24.3.2 System Maintenance : UNIX Syslog
You need to configure the UNIX syslog parameters described in the following table to activate
syslog and then choose what you want to log.
syslog and then choose what you want to log.
Your ZyXEL device sends five types of syslog messages. Some examples (not all ZyXEL
device specific) of these syslog messages with their message formats are shown next:
device specific) of these syslog messages with their message formats are shown next:
Menu 24.3 - System Maintenance - Log and Trace
2. Syslog Logging
4. Call-Triggering Packet
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= 0.0.0.0
Log Facility= Local 1
Active= No
Syslog Server IP Address= 0.0.0.0
Log Facility= Local 1
Table 118 Menu 24.3.2 System Maintenance : UNIX Syslog
PARAMETER
DESCRIPTION
Syslog:
Active Press [SPACE BAR] and then [ENTER] to turn syslog logging on or off.
Syslog Server IP
Address
Type the server name or IP address of the syslog server that will log the
selected categories of logs.
Log Facility Press [SPACE BAR] and then [ENTER] to select a location. The log facility
allows you to log the messages to different files in the syslog server. Refer to
the documentation of your syslog program for more details.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC
to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.