Sharp R-22GT ユーザーズマニュアル

A37564,R22GV,/22GT/23GT/24GT/25JT

15

Wipe the door and window on both sides fre-
quently with a damp cloth to remove any spills or
spatters. Always keep the door seals and seal
surfaces clean so that any grease, spills or spat-
ters are not allowed to build up. Such a build-up
could result in leakage of microwave energy from
the oven.

Keep the air intake filter clean. Clean at least every
two weeks or more often for heavy use.
Remove the air intake filter by pulling the two (2)
clips on the sides of the filter.
Wash the air intake filter in mild soapy water, rinse
and dry with a soft cloth.
After cleaning re-install the air intake filter.

Hole

Clip

Clip

Air intake filter

Hole

Oven

(B)

Splash cover

Hole

Fig.2

Fig.1

(A)

Splash cover

Door

1) For easy cleaning, wipe any spatters or spills

with a soft damp cloth or sponge at the end of
each day. For heavier spills, use mild soap and
rinse thoroughly with hot water.

2) At least once a week, remove the splash cover

and wash in a mild detergent solution. The
splash cover is located in the top of  the oven
and may easily be removed. REMEMBER TO
UNPLUG THE POWER CORD.
Remove two thumb screws (A) as shown in
Fig. 1. Then remove the splash cover from the
oven.
To replace the splash cover, insert two projec-
tions of the cover (B) into the holes of the oven
cavity backplate as shown in Fig. 2. And se-
cure the cover to the oven ceiling with two
thumb screws (A) as shown in Fig.1.

3) Wipe any grease, spills or spatters on the door

seal surfaces with a soft damp cloth or sponge
so that they do not build up. The door seals
must always be free of grease and spatters so
that the door closes properly.

R22GV/22GT/23GT/24GT/25JT,12-15

05.6.7, 11:29 AM

15