Sharp AJ-5030 ソフトウェアガイド
126
You must enter your E-mail address in FROM and at least one
receiving E-mail address in TO. All other settings in the E-mail
Settings field are optional.
receiving E-mail address in TO. All other settings in the E-mail
Settings field are optional.
• If desired, enter a subject in the subject line and a message in the
Message field.
• To adjust the scan settings, click the Show scan settings button.
6
When you have finished programming the Rapid Key or
Speed Dial number, click the OK button or the Apply
button to save your settings and send them to the Color
MFP unit. (Clicking the OK button will close the Control
Panel. Clicking the Apply button will leave the Control
Panel open.)
Speed Dial number, click the OK button or the Apply
button to save your settings and send them to the Color
MFP unit. (Clicking the OK button will close the Control
Panel. Clicking the Apply button will leave the Control
Panel open.)
Important!
If the Color MFP unit is busy with another operation, an error
message may appear when you click the OK or Apply button. Make
sure the unit is not busy and the display shows the date and time
before clicking the OK or Apply button.
If the Color MFP unit is busy with another operation, an error
message may appear when you click the OK or Apply button. Make
sure the unit is not busy and the display shows the date and time
before clicking the OK or Apply button.
Note
05.fm Page 126 Monday, February 5, 2001 4:34 PM