Sharp MX-2300N ユーザーガイド

The current system settings can be stored, previously stored system settings can be called up, and the factory default 
system settings can be restored. Touch the [Storing/Calling of system settings] key and configure the settings.

This is used to return the system settings to the factory 
default settings. If you wish to create a record of the 
current settings before restoring the factory default 
settings, print the current settings using "

" (page 116) in the system settings 

(administrator).

This is used to store the currently configured system 
settings. The stored settings will be retained even if the 
[POWER] key (

) is turned off. To call up the stored 

settings, use "

" which is explained 

below.
Items not stored

• Network Settings: These are not stored as unexpected 

settings may cause damage to the 
network.

• Product Keys: Product Keys are not stored as reissue 

of keys may be necessary.

This is used to call up and restore settings that were 
stored using "

The current settings will change to the settings called up 
from memory.

After executing this function, exit the system settings, 
turn off the [POWER] key (

), wait a brief interval, 

and then turn the [POWER] key (

) back on to 

make the factory default settings take effect.