Sharp MX-2300N ユーザーガイド
45
SCANNING TO USB MEMORY
Follow the steps below to send a scanned file to a commercially available USB memory device that has been connected
to the machine. This stores the file in the USB device.
to the machine. This stores the file in the USB device.
4
BASIC PROCEDURE FOR
SCANNING IN USB MEMORY
MODE
SCANNING IN USB MEMORY
MODE
• Consult your dealer or retailer for USB memory devices that can be used.
• When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot
be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below.
1
Connect the USB memory to the USB
connector (Type A) on the machine.
connector (Type A) on the machine.
System Settings: USB-Device Check
This is used to check the connection of a USB device to the machine.
This is used to check the connection of a USB device to the machine.