Sharp MX-2300N ユーザーガイド
68
SPECIFYING THE ORIGINAL SCAN SIZE
AND SEND SIZE (Enlarge/Reduce)
AND SEND SIZE (Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. For example, if the
scan size is 8-1/2" x 11" (A4) and the send size is 5-1/2" x 8-1/2" (B5), the image will be reduced before transmission.
scan size is 8-1/2" x 11" (A4) and the send size is 5-1/2" x 8-1/2" (B5), the image will be reduced before transmission.
• Only standard original sizes can be automatically detected.
• If the original is a non-standard size, you must set the scan size manually.
Quick File
File
Special Modes
Address Entry
Resend
Send
Address Book
Internet Fax
Mode Switch
Image
Settings
Send Settings
Scan
8 x11
1
/
2
Ready to send.
Manual RX
Auto
8-1/2" x 11" (A4)
"Scan Size"
Transmission
The image is reduced to
5-1/2" x 8-1/2" (B5)
before transmission
5-1/2" x 8-1/2" (B5)
before transmission
"Send Size" is
set to
5-1/2" x 8-1/2"
(B5)
set to
5-1/2" x 8-1/2"
(B5)