Sharp MX-2300N ユーザーガイド

When a normal transmission job is completed, it moves to the completed jobs screen and "Send OK" appears in the 
status column.
Received faxes, timer transmission jobs, retry jobs, and forwarding jobs are handled in the job status screen as 
explained below.

While a fax is being received, "Receiving" appears in the job queue screen.
When reception is completed, the job moves to the completed jobs screen and "In Memory" appears.
After the fax is printed, the status changes to "Printed".

A timer transmission job appears at the bottom of the job queue screen until the specified time arrives.
When the specified time arrives, the job is executed. If another job is in progress, the timer job is started when the other 
job is completed.

A retry job appears at the bottom of the job queue screen. When the set retry interval elapses, the job is executed. If 
there are jobs reserved ahead of the retry job, the retry job is reserved at the bottom of the job queue and executed 
when its turn arrives.

When Inbound Routing is enabled in the Web pages, fax reception jobs are handled as follows depending on the print 
setting.

☞

 (page 104)

• Received fax is not printed

"Receiving" appears in the job queue screen while the fax is being received. When reception is completed, the job 
moves to the job queue of the status screen of the mode in which forwarding is enabled.

• Received fax is printed

When reception is completed, the job moves to the completed jobs screen and "In Memory" appears. After the fax is 
printed, "Printed" appears. In addition, the job is added to the job queue of the job status screen of the mode in which 
forwarding is enabled. When forwarding received faxes is finished, "Forward OK" appears.