Sharp MX-2300N ユーザーガイド

Scanning begins.

• If you inserted the original pages in the document feeder 

tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.

• If you are scanning the original on the document glass, scan 

each page one page at a time.
When scanning finishes, place the next original and press 
the [BLACK & WHITE START] key (

). Repeat until all 

pages have been scanned and then press the [Read-End] 
key.
A beep will sound to indicate that scanning is finished.

• The time can be specified up to a week in advance.

• Up to 94 timer transmissions can be stored at once.

• Only one timer polling operation can be stored at once. If you wish to poll from multiple machines, store a serial polling 

timer operation.

• If another transmission is in progress when the specified time arrives, the timer operation will begin after that transmission 

is finished.

• Other operations can be performed after a timer transmission is set up.

• Dialing with the speaker and direct transmission cannot be used in a timer transmission.

• If you give priority to a timer transmission in the job status screen, the timer setting will be canceled and the transmission 

will begin after the job in progress is finished. 

☞

 (page 56)

To cancel timer transmission...
Touch the [Cancel] key in the screen of step 4.