Sharp MX-2300N ユーザーガイド

Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] 
(black).
If only the rectangular area around the letter in a key is 
highlighted, the settings have been changed from the 
factory default settings.

Select the gradation with the 

 keys.

Touch the 

 keys to move the highlighting to one 

of gradations "1" to "8" or "All".
To adjust all eight gradations at once, move the 
highlighting to "All".

To darken the density of the selected gradation, touch the 

 key. To lighten the density, touch the 

 key. Each 

time one of the keys is touched, the indicator frame 
moves up or down one level.

When the [OK] key is touched, you will return to the 
special mode screen. Touch the [OK] key to return to the 
base screen of the copy mode.

To return the color balance values to the default settings...
Touch the 

 key. The values of all 8 gradations return to the default color balance values.

The default color balance values are set in "Initial Color Balance Setting" in the system settings (administrator).

Copying will begin.

• If the originals were placed in the document feeder tray, the 

originals are copied.

• If you are using the document glass, copy each page one 

page at a time.

To cancel scanning of the original and copying...
Press the [STOP] key (

).

To cancel the color balance setting...
Touch the [Cancel] key in the screen of step 5.

System Settings (Administrator): Initial Color Balance Setting
This is used to set the default values to which the color balance values return when the 

 key is pressed.

Color Balance

Y

M

C

Bk

OK

OK

Cancel

All

1

2

3

4

5

6

7

8

Color

Adjustments

The settings of all gradations 
are moved toward +

The settings of all gradations 
are moved toward -