Sharp MX-2300N ユーザーガイド

This screen appears when the [JOB STATUS] key on the operation panel is pressed.
The screen shows lists of the jobs that are reserved and in progress, and jobs that have been completed. This screen is 
used to check jobs, move a job to the top of the job queue, or delete a job.

Add paper.
When the status is "Paper Empty", the specified size of 
paper for the job is not loaded in any of the trays. In this 
case, the job will be held until the required size of paper 
is loaded. Other jobs that are waiting will be printed (if 
possible) ahead of the held job. (However, other jobs will 
not be printed if the paper ran out while printing was in 
progress.)
If you need to change the paper size because the 
specified paper size is not available, touch the key of the 
job in the list to select it, touch the [Detail] key described 
in (8), and select a different paper size.

• Lists are displayed of jobs that are reserved and in 

progress (the job queue), and completed.
When the [Print Job] key is touched in the mode switch 
keys, the job status screen selector key changes to 
show the "Spool" list.
Each job key in the lists shows a brief description of 
the job and its status.

• The "Spool" screen shows spooled print jobs and 

encrypted PDF direct print jobs. To move an encrypted 
PDF job from the spool list to the "Job Queue", touch 
the key of the job and enter the job password.

This switches the job list display to spooled jobs, the job 
queue, or completed jobs.
[Spool]:  This shows encrypted PDF jobs printed by direct 

printing. The [Spool] key can be displayed when 
print jobs are displayed.

[Job Queue]:  This shows reserved jobs and the job in 

progress.

[Complete]: This shows completed jobs.

Use these keys to switch to print mode, scan mode, fax 
mode, or Internet fax mode.

• The [Print Job] key shows the list of copy, print, 

received fax, received Internet fax, and self print jobs.

• The [Scan to] key shows the list of transmission jobs 

that use the scanner function.

• The [Fax Job] key shows the list of transmission jobs 

that use the fax and PC-Fax functions.

• The [Internet Fax] key shows the list of transmission 

jobs that use the Internet fax and PC-I-fax functions.

For more information on the job status screen in each 
mode, see the manual for each mode.

These change the page of the displayed job list.

Use this key to cancel the job currently in progress or a 
selected reserved job. Note that printing of received 
faxes and received Internet faxes cannot be canceled.

A reserved job in the "Job Queue" screen can be printed 
ahead of all other reserved jobs by selecting the job and 
then touching this key.
In the print job queue, you can select a print or copy job 
to which you wish to give priority and touch this key. The 
job in progress stops and printing of the selected job 
begins. When the selected job is completed, the 
interrupted job resumes.

This shows detailed information on a selected job.
When a job has been stored using Quick File or File in 
document filing mode, or when a broadcast transmission 
has been performed in image send mode, the job 
appears as a key in the [Complete] screen. You can 
touch this key to show details on the completed job, and 
you can also touch the [Call] key that appears to reprint 
or resend the job.

A job that appears in the completed jobs screen as a key 
can be touched followed by the [Call] key to reprint or 
resend the job. This is the same [Call] key that appears 
when the [Detail] key is touched.

Job Queue

Sets / Progress

Status

Detail

Priority

Stop/Delete

Internet Fax

Fax Job

Scan to

Print Job

1/1

Spool

Complete

Job Queue

Copy

020 / 001

Copying

Copy

020 / 000

Paper Empty

BBB BBB

020 / 000

Waiting

0312345678

002 / 000

Waiting

Detail

Call

Internet Fax

Spool

Complete

Job Queue