Sharp MX-2300N ユーザーガイド

This section explains how to place the original on the document glass.

When a non-standard size original is placed in copy 
mode, see "SPECIFYING THE ORIGINAL SIZE" in the 
Copier Guide.
When a non-standard size original is placed for a fax or 
scanner transmission, see "SPECIFYING THE SCAN 
SIZE OF THE ORIGINAL" in the Facsimile Guide or 
Scanner Guide.

Standard sizes
11" (width) x 17" (length)
A3: 297 mm (width) x 420 mm (length)
Non-standard sizes
297 mm (width) x 432 mm (length)

Place the original face down in the far left corner of the 
document glass.

The original should always be placed in the far left corner, 
regardless of the size.
Align the top left corner of the original with the tip of the 

 

mark.

• Do not place any objects under the original size detector.

Closing the automatic document feeder with an object underneath may damage the original size detector and 
prevent correct detection of the original size.

• If you are placing a small original on the document glass, it is convenient to place a blank sheet of 8-1/2" x 11" or 

5-1/2" x 8-1/2" (A4 or B5) paper on top of the original.

Original size 
detector

8-1/2" x 11" or A4

8-1/2" x 14"
or B4

11" x 17" or A3

8-1/2" x 11"R or A4R

Document glass scale

mark

Document glass scale

mark

5-1/2" x 8-1/2"
or A5

B5

B5R